Aerospace

In aviation, the highest requirements are placed on installed components in terms of safety and reliability. This especially applies to sensors which are used in different places. For example in aircraft assembly, sensors from Micro-Epsilon ensure non-contact rivet hole measurement. Micro-Epsilon develops displacement and position sensors for aircraft measurement tasks landing gear, wing assembly, fuselage and engines, where they enable reliable determination of measurement values.

Balancing of flight controls

When an aircraft is repainted, certain parts such as the rudder and elevator must be balanced in terms of center of gravity and weight distribution in order to ensure that the aircraft can still fly in ...

Show details

Load tests on airplane wings

In order to optimize the behavior of wings during a flight, the wings are already subjected to vibration tests during the construction. 120 wireSENSOR draw-wire sensors are connected to the wing and synchronized. ...

Show details

Door lock detection

Before an aircraft starts, the doors are locked centrally. In order to determine the status of the locking, inductive displacement sensors from Micro-Epsilon are used. These detect the end position directly ...

Show details

Brake temperature measurement

Before an airplane can start, the temperature in the brakes must be below a certain limit. To determine the temperature, non-contact temperature sensors from Micro-Epsilon are used in the landing gear.

Show details

Reliable position recognition of the Wing-Tip-Brake

The so-called Wing Tip Brake sits on the shaft in the outer wing area. It avoids uneven extension of slats and flaps and uncontrolled movements of the buoyancy aids by external influences. Inductive displacement ...

Show details

Micro-Epsilon Messtechnik
Königbacher Str. 15
94496 Ortenburg, Germany
info@micro-epsilon.com
+49 8542 / 168 - 0
+49 8542 / 168 - 90