Filling level

Filling levels can be measured directly or indirectly in many ways using displacement sensors. The confocal principle is usually applied for liquids in doing so. The filling level measurement for solids is comparable with a distance measurement. Micro-Epsilon makes many different options possible due to the extensive range of different sensors.

Fill level measurement

For smooth production and logistics processes, precise quantity measurements at storage locations for bulk goods or plastic granulates, for example, is a decisive factor. In order to avoid production downtime ...

Show details

Filling level measurement on a barrel pump

For this measurement task, the barrel stands on the platform of the hydraulic press. There is one hydraulic cylinder each on the left and right. Both cylinders are connected to each other by a cross beam. ...

Show details

Height measurement of Petri dishes

In microbiology, cell cultures are used for the analysis of so-called agar plates. The agar plate should be consistently as high as possible - this is a critical factor for later evaluation of the cell ...

Show details

Fluid level measurement of aluminum pig irons

In aluminum casting plants or foundries, the cast is poured into shape to form small bars, known as pig irons. The charging level in the forming process is critical in ensuring consistent weight of ...

Show details

Liquid level in falling film reactors

In falling film reactors used by the chemicals industry, the geometrical dimensions of the reactor metal sheet are measured using confocal sensors. The filling level of the liquid is also measured during ...

Show details

Liquid Aluminum Level Measurement

To obtain a homogeneous oxide-free aluminum cast, the aluminum level in the open mould must be kept constant to within 1 mm or better. A constant level is achieved by controlled tilting of the ...

Show details

Absolute and continuous filling-level measurement

Continuous acquisition of the level must be ensured for high precision monitoring of filling levels. These requirements can be obtained with a MICROEPSILON vipSENSOR element whereby the actual sensor is ...

Show details

Liquid level measurement during capacitor production

The capacitors must be dipped into a bath of solvent during the capacitor production. In doing so, it is important that the blanks only have a specified immersion depth. Confocal chromatic sensors are ...

Show details

Filling level

A filling level measurement situation can arise with a liquid substance as well as with dry, bulky goods. The precise measurement of liquid levels is difficult to achieve, nevertheless, the confocal measuring ...

Show details

Filling level

A filling level measurement situation can arise with a liquid substance as well as with dry, bulky goods. The precise measurement of liquid levels is difficult to achieve, nevertheless, the confocal measuring ...

Show details

Liquid level

Precisely measuring the level of liquids is known in measuring technology as difficult to achieve. Nevertheless, the confocal measuring technique is suitable as a very good solution for this problem. Light ...

Show details

Biogas plant filling quantity

The filling quantity in the fermenter of a biogas plant can be determined using the expansion of the gas tank. This is important in order to assure a constant gas flow to the combustion engine. Draw-wire ...

Show details

HEADQUARTER MICRO-EPSILON AMERICA
8120 Brownleigh Dr.
Raleigh, NC 27617
me-usa@micro-epsilon.com
919 787 9707
919 787 9706