Press releases of Micro-Epsilon

In wind turbines, the bearing gap is very important because the better the sliding properties, the higher the plant effectiveness and service life. The bearing gap between the bearing surface and the drive shaft is reliably monitored using inductive sensors from Micro-Epsilon based on eddy currents.

Monitoring the clamping position in machine tools is an extremely important and critical measurement task. In order to avoid incorrect machining and the high resulting costs, the position of the tool must be detected. Here, the induSENSOR LVP displacement sensor is used. This compact and wear-free sensor supplies a continuous analog signal according to the stroke motion of the drawbar when clamping the tool.

The latest Configuration Tools 6.0 software combines uniformity with increased functionality and improved ease of use. The software is now available for scanCONTROL sensors and gapCONTROL sensors and therefore arrives as a joint software solution for both sensor types, which now also supports measurements and evaluations of different gap types.

The new, confocal chromatic confocalDT IFS2404-2 sensor is used for high precision distance and thickness measurements of transparent materials. With a diameter of just 12 mm, the sensor can also be integrated into restricted installation space. The innovative lens enables high measurement accuracy and a small light spot diameter.

The new optoNCDT 1750LL laser sensor is used in high precision distance measurements of metallic and structured surfaces. Their oval-shaped light spot makes it possible to compensate for physical interferences and to output stable measurement values. Therefore, the optoNCDT 1750LL can be used where conventional laser point sensors are operating at their limits.

In order to inspect the height of pressed-in contact pins on PCBs immediately after the assembly process, scanCONTROL laser scanners from Micro-Epsilon are used. These create a 3D profile of each PCB. Faced with miniature targets, the sensors must fulfill high requirements in terms of precision and speed.

During surface finishing of strip material, the color sensor system used must meet high requirements in terms of precision and speed. In order to detect color shades with an accuracy of ΔE <0.1, the colorCONTROL ACS7000 color measuring system from Micro-Epsilon is used. It is directly integrated in the production line and operates with high precision and speed.

With the reflectCONTROL, surfaceCONTROL and scanCONTROL systems, Micro-Epsilon offers innovative solutions for 3D surface inspection, while opening up numerous fields of application for geometrical measurements, surface inspection and defect detection. These systems enable 100% inspection and can be directly integrated into the processing line or on a robot.

The eddyNCDT 3060 inductive measurement system is based on eddy currents and enables fast, precise displacement measurements in industrial environments. More than 400 sensor models can be combined with the eddyNCDT 3060. Based on ease of use and smart signal processing, this non-contact system defines a new performance class in inductive displacement measurement.

The optoCONTROL 2520-46(090) extends the product range of optical precision micrometers. With the receiver able to rotate by 90°, the micrometer is ideal for installations with limited space. Furthermore, it is classified as laser class 1M and includes an integrated controller. Configuration is via a user-friendly web interface.

The new colorSENSOR CFO200 takes the powerful True Color recognition sensors of the CFO series to a new performance level. The new model is distinguished by its increased precision, speed, light power, color memory and additional connections. With a measurement frequency of 20kHz, 320 colors in 254 color groups can be detected to the highest color accuracy. In addition, the innovative web interface provides ease of use.

Micro-Epsilon has extended its product range of capacitive displacement and distance sensors by capacitive thread sensors. These are not intended for clamping but are screwed into a thread. This opens up numerous application possibilities, e.g. when mounting on walls or in bore holes.