Position tolerance of the weld for process optimization

The bearing tolerances of two welded plates, coils or belts are inspected in-line by the WSS8210. Therefore, it is ensured that the semi-products produced are only subject to be further processed if its tolerance corresponds as well as that welded objects can be adjusted in its position before bending in order that the tolerance can be guaranteed. Having the knowledge of the thermal deformations built and the shape of the welding seam, vital information regarding the welding parameters can be deduced. Therefore, the complete welding process can be controlled.

Benefits:

Optimization of the automatic welding process
Reduction of the downstream machining process
Avoids cost-intensive rejection
Precise documentation of production process without any interruption

WSS 8200.LLT

Catalog Metal inspection (PDF, 2.5 MB)

Das WSS 8200.LLT arbeitet auf Basis der Laserlinien-Triangulation. Es kann sowohl auf einer Seite der Schweißnaht als auf beiden Seiten eingesetzt werden. Im zweiten Fall kann optional ein Paket zur Dickenmessung integriert werden.

Besonderheiten:

Profilfrequenz bis 4000Hz
Auflösung 10µm
Länge der Laserlinie bis zu 100 mm

WSS 8205.LLT

Catalog Metal inspection (PDF, 2.5 MB)

The WSS 8205.LLT is based on the laser line triangulation principle. The system inspects the weld seam parameters for defects such as undercuts and movements or the angle between the objects welded. In the case of complex geometry it can be operated by a robot. Entering CAD files, robot motions are automatically simulated which enable fully-automatically inspection. Additionally, Teach In of the tracks is offered by a master part.

Special features: