|
|
scanCONTROL 2800 / 2810: 2D/3D Laser-Line Triangulation
The laser-line profile sensor, scanCONTROL 2800, makes use of the triangulation principle for two-dimensional acquisition of profiles on a variety of different target surfaces.
In contrast to familiar point laser sensors, a line optical system projects a laser line onto the surface of the object to be measured. The back scattered light from the laser line is registered on a CMOS array by a high quality optical system. Along with distance information (z-axis), the controller also calculates the true position along the laser line (x-axis) from the camera image and outputs both values in the sensor's two-dimensional coordinate system.
A moving object or a scanning sensor will generate a three-dimensional representation of the object.
|
|
|
Special characteristics of the Laserline scanner:
|
|
high accuracy
|
|
very high frame frequency
|
|
flexible field of view
|
|
high-performance signal processing unit
|
|
innovative CMOS-technology
|
Downloads and links
Technical data:
|
|
| Measuring range z-axis: |
up to 245 mm |
| Measuring range x-axis: |
up to 140 mm |
| Resolution z-axis: |
up to 10 µm |
| Resolution x-axis: |
up to 1024 points/profile |
| Profile frequency |
up to 4.000 profiles/s |
| Measuring rate: |
up to 256.000 points/s |
Application types
scanCONTROL 2800 is the base unit for customer's self-programmed applications. The series 2800 supplies high-precision x- and z-values with fast profile progression for individual data preparation, for example, also for applications on coordinate measuring machines.
scanCONTROL 2810 is equipped with a pre-programmed signal processor for measurements on beads (bulges, bumps) or grooves (indentations, gaps). The series 2810 is usually used in automation applications.
Downloads for profile sensor scanCONTROL 2800 / 2810
|
Product
|
Data sheet
|
Manual
|
Software
|
CAD
|
|
MICRO-EPSILON international:
DE
EN
FR
Deutschland
United Kingdom
France
Schweiz
Czech Republic
America
Россия
China