Rebound behavior of the felt

In paper production the paper band is transported over a felt conveyer from the screen station to the pressing station. This felt removes the residual moisture from the paper. For water separation the felt passes a defined gap between the central and the suction roller. The wear and the rebound behavior of the felt determine the hygroscopy and are thus of decisive importance for the paper quality. Laser-optical position measuring systems monitor the wear at a guide roller. Measuring with two sensors compensates the ovality / stroke of the guide roller. The result of the measurement is the effective thickness of the felt. If the measured value falls below the specified limits of wear, the production can be stopped and the felt can be replaced. Because of the difficult environmental conditions the sensors are installed in a protective housing.


Trade shows
Subscribe now to our measurement newsletter

ME USA Headquarter

919 787 9707
919 787 9706
Find contact person
Mastercard and VISA accepted Express payment with
Visa or Mastercard
8120 Brownleigh Dr. Raleigh, NC 27617 mobile phone icon
919 787 9707 phone icon
919 787 9706 fax icon