Vehicle construction, shipbuilding, rail traffic

Sprayed skins for vehicle instruments and controls and for airbag cladding are sprayed using a robot-guided nozzle. The thickness of the sprayed skin is ...

Draw-wire sensors are used to reduce the standstill time of slag transporters during the loading and unloading. They are installed on the tipping cylinder ...

Automatically closing doors, flaps or covers always have the danger of pinching a finger or the hand. There are systems for this which stop the movement ...

Using a film between several glass panes, laminated safety glass prevents dangerous shards flying around in the case of breakage. The adhesive film is ...

Flat glass for demanding industrial tasks is subjected to 100% testing after the production. Dimensional accuracy is important for industrial glass which ...

The later appearance of the object plays a crucial role everywhere that panes are positioned automatically. Apart from the shape, stability, colour etc., ...

Apart from the angle of the guide vanes, the speed of the vanes on the turbine wheel is important for the performance of the turbocharger. The rotation ...

It is important during the gluing in of glass panes in automobile production that the adhesive beading shows a constant track. Therefore a robot arm tracks ...

Many applications can be assigned to the automotive area. They range from automobile manufacturing itself to the various automotive suppliers. Quality ...

The width of the object is often an important dimension for the dimension control. The width can in some respects also be interpreted as thickness and ...

Specially shaped eddy current sensors are integrated directly in the crankcase where they measure, for example, the expansion of the cylinder head gasket ...

The camber or the toe angle is often adjusted during the service life of a passenger car. It is also often necessary to check the adjustments in the development ...

Controlling the valves of combustion engines using electromagnetic actuators is a current objective of many engine developers. This technology makes possible ...

Brake discs are subject to the highest loads in use and are responsible for the safety of vehicles. For this reason alone, brake discs are thoroughly inspected ...

The tilting and the driving behaviour are often examined in driving tests with automobiles. Optical laser sensors are ideally suitable for this. They are ...

Combustion engines must withstand maximum loads during a long service life. In order to cope with this requirement, eddy current sensors from the eddyNCDT ...

The Top Dead Centre of the cylinder movement is measured for adjustment of the precise ignition point in engine development. In doing so, a miniature eddy ...

Among other things, the lateral movement of the piston in the cylinder is crucial for the service life of engines. Miniature eddy current sensors for this ...

The exterior appearance is an important factor for many surfaces. The reflectCONTROL inspection system is suitable for automatic defect inspection of reflecting ...

Sliding bearings are used for crankshaft bearings in the engine. A specific minimum distance is required so that the bearing operates as wear-free as possible. ...

The oil film thickness for combustion engines describes the gap and thus the quantity of oil between piston and cylinder wall. Thus it is sometimes a determining ...

During the production of windscreens, it can happen that the correct curvature of the windscreen has not been maintained or the fissures and cracks in ...

Vibrations play a large role in the manufacturing industry. There is always vibration where products are in motion. In many cases, this is perceived as ...

Monitoring the movement of gas pressure or hydraulic cylinders is solved very elegantly using an eddy current sensor. This sensor is integrated in the ...

Border strips are automatically adhered to glass by robots in vehicle production. This automatic process must be monitored as the application of uniform ...

Short cycle times for the assembly are extremely important in automobile production. In order to design the optimum ergonomics for the worker, the vehicles ...