Measurement and automation technology

It is essential to measure in bore holes for some applications. In doing so, the depth or the wall structure of a bore hole can usually be measured. Only ...

The width of the object is often an important dimension for the dimension control. The width can in some respects also be interpreted as thickness and ...

There are many uses of sockets in the automotive area. The dimensionCONTROL system is used for the quality inspection of these parts. An optical micrometer ...

The CD Express measuring instrument developed by a British company measures circumference, diameter and ovality of cylindrically shaped objects. The measuring ...

A consistent yarn thickness is a prerequisite in the textile industry for high quality products. Therefore, the naturally occurring yarn thickness fluctuations ...

Measuring complex part geometries is a task for the scanCONTROL laser scanner. Laser scanners are used in the precision machines of EHR in order to perform ...

Overhead conveyors which move automatically through the production process on a rail are used for the transportation of many components. A certain minimum ...

The tree trunk sawn into planks in saw mills always still shows the wane of the original tree on the edges. In order to achieve an optimum cutting width ...

Banding machines are used during the manufacture of cables in order to provide cables with a protective sheath. The wire runs centrally through a roll ...

The setting of the distance between the drum and the flat is crucial for carding quality of fibre, e.g. wool. Investigations have shown that manual gap ...

Coordinate measurement machines are used for measuring many different components. Different scanners and measuring equipment measure the surface of the ...

Sliding bearings are used in combustion engines for the crankshaft and camshaft. The bearing shells are often composed of three layers whereby the inner ...

Thickness measurement using displacement sensors is a wide application area. Basically there are distinctions between non-destructive/destructive, non-contact/with ...

Measuring oscillation is a frequently occurring measuring task. Oscillations occur in research and development, in machines and plant construction as well ...

Profile measurement generally describes the measurement of the object contour, flat or as a track. Basically, it is possible that either the sensor traverses ...

Modern wet razors provide the function of supporting the shave using vibration. A functional test is performed at the end of production for these models. ...

A groove can occur in many different objects as a sustained depression. Whether a groove is desired or not is the question. If a single track measurement ...

Industrial robots have become indispensable in modern production facilities due to their reliability and speed. During setting up and also at regular intervals ...

For automatic welding processes, the quality of the weld is often dependent on how precisely the welding head is positioned for the seam place. If the ...

It is important to know the angle of a surface for many processes. Contacting measurement is not expedient in automated processes. scanCONTROL 2800 or ...