Sensors

Inspection systems

Applications

Search by measurement
- Dimensions
- Thickness
- Revolutions
- Deflection
- Diameter
- Filling level
- Lifting height, lifting
- Positioning
- Profile
- Width
- Gap
- Temperature
- Distance
Search by industry

Home > Search by measurement > Lifting height, lifting

Lifting height, lifting

Lifting height is a factor which must be measured very frequently. A lifting height measurement is necessary everywhere where automatic lifting processes should make the daily work easier.
The measurement system can be installed subsequently or already considered and integrated during the planning of the system.

Related sensors and products

Draw-wire displacement sensors Eddy current sensors for displacement and position Laser distance sensors for extra long ranges Laser sensors for displacement and position Inductive sensors (LVDT)

View:

Lift height measurement for maintenance work on bridges

In certain cases for maintenance work on bridges, the bridge must be raised, for example to replace the supports. Heavy-duty jacks are used for this. The distance at each jack is measured with a draw-wire ...

details

Catering vehicle lifting height

Catering vehicles play an important role in today’s passenger air traffic. They are responsible for there being enough foodstuffs on board. It is especially difficult for the Airbus A380 to reach the loading ...

details

Injector needle lifting

Combustion engines are a combination of many different technologies. Therefore, the precision of each individual one is responsible for the performance of the engine. The actual injected amount of fuel for Common ...

details

Lift platform - automotive

Short cycle times for the assembly are extremely important in automobile production. In order to design the optimum ergonomics for the worker, the vehicles are transported along the production line on lift tables. ...

details

Lift platform – lift height

Side supports against tipping over are installed for lift trucks and lift work platforms. The crane or the platform can only be put into operation when the supports are completely extended so that there is also no danger ...

details

Vehicle distance to the road surface

The tilting and the driving behavior are often examined in driving tests with automobiles. Optical laser sensors are ideally suitable for this. They are mounted outside on the body shell and measure the distance from there ...

details

Rack control unit - lift height

The frequently used automatic rack control units make modern warehousing much easier. These units must automatically travel long distances and position the products with millimetre precision at the end. Modern optical laser ...

details

Training monitoring for rehabilitation machines

Optimum execution of the training plays an important role in the rehabilitation area. Data for monitoring the performance of the individual exercises are provided to the trainer using a network or a chip card. Draw-wire sensors, ...

details

Forklift lifting height

A large part of internal transportation is performed by forklifts. The risk of tipping the forklift when products are lifted is high. Therefore, the permitted speed has been restricted with limit switches. Draw-wire sensors from ...

details

Synchronized lifting system lift height

Mobile lifting jacks are being used more and more often for commercial and railed vehicles. The lifting jacks for commercial vehicles are often designed as column lifts. In contrast, railed vehicles are often lifted on the frame. ...

details

Precision synchronized lifting system

Synchronized lifting systems enable the raising and lowering of heavy loads controlled for distance and force or the controlled forward feed of large components. To achieve this, eight or more cylinders are connected to a central ...

details

Underwater Measurement of axial movement and shaft play

The functional safety of systems of special economic importance often depends on the perfect operation of delivery devices (pumps). Increased radial shaftwhirl, or an axial shift due to termal expansion, are first signs of possible ...

details

Roller levitation height

The distance of both rollers from each other or from the roller to the support surface is the crucial dimension for rolling processes for metals, plastics or other materials. In the case of sensitive processes and high material accuracies, ...

details

Subscribe now to our measurement newsletter

ME USA Headquarter

919 787 9707

919 787 9706

Send email

me-usa@micro-epsilon.com

Find contact person